Sir Stephen Timms

It is a pleasure to serve under your chairmanship this afternoon, Dr Allin-Khan. I congratulate the hon. Member for Eastleigh (Liz Jarvis) on securing this important debate. I also pay tribute to her for her consistent work on this issue in supporting her constituent, Caroline Hudson, whose brother-in-law, George Elliott, tragically died of silicosis, as we have heard. I am very pleased to see my hon. Friend the Member for Blyth and Ashington (Ian Lavery) in his place, as he invariably is for debates on health and safety matters, and to see the hon. Member for Strangford (Jim Shannon), too. I am the Minister responsible for health and safety in the workplace and for the Health and Safety Executive, or HSE. There has rightly been a lot of interest and correspondence lately about the increased dangers of silicosis resulting from engineered stone, the concerns that have been raised in this debate. Workers—often quite young people, as we have heard—who have worked with engineered stone have been made seriously ill or even, on occasion, lost their lives. I want to extend my deepest sympathy to all individuals and families affected. We have been rightly informed that respirable crystalline silica—RCS—is a fine dust. It cannot normally be seen by the naked eye when airborne, but it does generally arise in visibly dusty processes. It is breathed in through the nose and mouth, can stay in the lungs for years and can cause irreversible lung damage before any symptoms become apparent. The illness it causes can continue to worsen after exposure stops. Breathing in RCS can lead to silicosis and the very serious harms we have heard about. It can also lead to other problems, including chronic obstructive pulmonary disease and lung cancer, as the hon. Member for Eastleigh said. Every worker should be able to return home safe from work without fear of succumbing to a preventable deadly lung disease. Silica dust risks have long been recognised but we now know that engineered stone can contain very high concentrations of crystalline silica, as we have been reminded. What is particularly alarming in the past couple of years is the emergence of accelerated silicosis, which is linked to the processing of engineered stone containing high levels of silica at a much higher throughput without effective exposure controls being in place. As one might expect, engineered stone can be processed much more quickly than natural stone and that means that the volume of silica dust a worker can be exposed to is much greater. As a result, we have seen across the world rapid onset of illness after quite short exposure periods, with severe and irreversible lung damage occurring. As we have rightly been told in this debate, all of that is preventable where exposure to silica dust is controlled. We are determined that it should be prevented. It is well known, as we have been reminded, that Australia introduced a ban on engineered stone in July 2024, and California is now considering a similar approach. It is worth noting, though, that the danger of silicosis arises from natural stone, not just engineered stone. Having introduced a ban on engineered stone in July 2024, Australia then introduced restrictions on the use of natural stone in September of that year. We are not currently proposing a ban in the UK, because we do not think that is the right approach. HSE is working closely here with the Worktop Fabricators Federation. That has developed, in conjunction with the British Occupational Health Society, for which I have a high regarded, a quality mark for worktops, to reassure consumers that they are buying a worktop that has been produced safely, not putting workers at risk. It has a logo and the wording “strict silica safety standards applied”. Being able to display that quality mark is dependent on the fabricator demonstrating to a registered occupational hygienist compliance with a 16-point list, including, for example, point number 3: “The use of lower silica products (below 30%) wherever possible.” Accredited products can now be bought from some retailers listed on the Worktop Fabricators Federation website. As I said, we are going to keep this closely under review, though we are not currently proposing a ban on engineered stone in the UK. It would not solve the problem in workplaces that did not have adequate safeguards, because as I have said, problems can arise with natural stone. And the evidence is clear that workers can be protected from the dangers of engineered stone if the right control measures are in place. Those controls need to be in place now to make sure that exposure to harmful dust does not occur. One difference with Australia is the concern there about the safety of people installing the worktops. That has not been raised with me as yet. The risk that we have identified here is to people in workshops cutting the materials ahead of installation. There is a serious problem there, but of course it is possible that the problem could arise in installation as well, and we will keep this closely under review. A ban could lead to unintended consequences with alternative, less well-known materials introducing new risks. Last week, the Health and Safety Executive met Safe Work Australia—the body responsible—to discuss the impact of the ban there. It did an initial review and it identified potential concerns that the ban had led to complacency about the safety of other products that are not prohibited, suggesting that they were assumed to be safe to use without control measures when actually they are not. Control measures are needed for those products as well. But we are going to keep in touch with Safe Work Australia and keep the experience of the ban in Australia under review. A lot of workers in Britain work with these materials every day. Workers and their employers need to understand that controls to prevent exposure are essential, not optional. For many decades, we have had in place a robust regulatory framework—the Control of Substances Hazardous to Health Regulations, known as COSHH. That includes the need for control measures, substitution with less harmful materials, and health surveillance. There is also a workplace exposure limit of 0.1 mg per cubic metre for working with silica. That ceiling must not be exceeded, but those with duties are required to minimise exposure below that level. The HSE has published a range of practical guidance—some of it very recent—for those where risks are highest. That is focused on the need to control the dust at source. But the law and guidance are effective only when followed, and it is here that the HSE is now focusing its efforts. Over the last two years, the HSE has been building the evidence base, working with suppliers and developing an effective response. I was pleased to see the hon. Member for Eastleigh welcome that activity recently.